NRL-developed Topcoat Applied on Entire Freeboard of Navy Ship


07/17/2017 12:00 EDT - 77-17r
Contact: Victor Chen, (202) 767-2541



WASHINGTON – Recently, a novel coating developed by researchers at the U.S. Naval Research Laboratory (NRL) for the exterior topsides of Navy surface ships went beyond small area testing to covering the entire freeboard of an amphibious assault ship.

Until April of 2017, NRL’s single-component (1K) polysiloxane coating had only been tested on 400-800 sq.ft. areas of ships due to limited production quantities and the typical size of topside paint repairs conducted by their crews.

Coated Ship SAN DIEGO – Port side view of USS Essex (LHD 2) after full application of an NRL-developed 1K polysiloxane topcoat in 2017. The Essex’s entire freeboard, approximately 105,000 sq. ft., was covered with 320 gallons in about four weeks. NRL’s patented 1K topcoat has demonstrated better exterior durability compared to legacy surface ship.

However, based on positive Sailor feedback, and the 1K coating’s outperformance of existing coatings with regard to color and gloss retention in sunlight, Sailors from the USS Essex (LHD-2) requested that larger quantities of the 1K polysiloxane coating be produced to paint the entire freeboard, approximately 105,000 sq.ft.

Painting with 1K also helped return the ship to its required semi-gloss, haze gray camouflage appearance.

Dr. Erick Iezzi of NRL’s Chemistry Division is the principal investigator and inventor of the 1K technology.

“The Navy was in need of a better solution for all the topside painting performed by Sailors on surface ships,” Iezzi said. “The 1K is advantageous in that it provides greater than 5 times the retention of visual camouflage and better resistance to shipboard contaminants, such as running rust and soot, than the legacy silicone alkyds, which should reduce future costs to the Navy by eliminating the need to overcoat the latter every 9 to 12 months as a result of discoloration and staining.”

The application on the freeboard of the USS Essex was performed entirely by Sailors, consumed more than 300 gallons of the 1K polysiloxane, and took about 4 weeks to complete.

Single-component refers to an all-in-one-can system that does not require the measuring and mixing of two or more components before application, thus providing a “user-friendly” system for Sailors when applying on ships.

“The 1K polysiloxane is easy to use. There is no mixing, surface preparation is easy, and it covers well,” said Lt. j.g. Donald Ham, Essex’s Assistant Deck Department Head. “We painted our entire hull with approximately 320 gallons of the 1K, whereas it would have taken greater quantities of qualified two-component (2K) polysiloxanes. Thus, we not only saved time, but we saved money. The best part is that the 1K polysiloxane rolls-on the ship just like the legacy silicone alkyds."

Applied Coatings SAN DIEGO – Sailors roll-applying the NRL-developed 1K polysiloxane topcoat on the starboard side of USS Essex (LHD 2) in 2017.

Funding for development, optimization and transition of the technology was provided by the Naval Sea Systems (NAVSEA) Command.

"The 1K polysiloxane coating has tremendous potential,” said Mark Lattner, manager for the NAVSEA Paint Center of Excellence program. “If the application on the USS Essex performs as expected, our Sailors will be empowered with an advanced coating technology that is robust, easy to use, and will yield significant cost avoidance.”

NRL representatives and NAVSEA Corrosion Control Assistance Team (CCAT) members oversaw the application on the USS Essex and documented all aspects of the application. The performance of the 1K polysiloxane on the USS Essex will be monitored for several years, although the coating is estimated to be on the Qualified Products Database (QPD) by August 2017. The 1K polysiloxane is expected to save the Navy several million dollars annually once fully implemented.

The patented technology, U.S. 9139753, has been licensed to a coating manufacturer for optimization and scale-up, and testing to the Navy’s MIL-PRF-24635, Type V (high-durability) topside performance requirements were supervised by James Tagert of NRL’s Chemistry Division.



Get NRL News: RSS


About the U.S. Naval Research Laboratory

The U.S. Naval Research Laboratory provides the advanced scientific capabilities required to bolster our country's position of global naval leadership. The Laboratory, with a total complement of approximately 2,500 personnel, is located in southwest Washington, D.C., with other major sites at the Stennis Space Center, Miss., and Monterey, Calif. NRL has served the Navy and the nation for over 90 years and continues to advance research further than you can imagine. For more information, visit the NRL website or join the conversation on Twitter, Facebook, and YouTube.

Comment policy: We hope to receive submissions from all viewpoints, but we ask that all participants agree to the Department of Defense Social Media User Agreement. All comments are reviewed before being posted.